Image

3DMonstr Quad Extruder #3DPrinter Gets A Heated Print Bed and New Stretch Goal

http://i0.wp.com/allabout3dprinting.com/wp-content/uploads/2014/01/The-3DMonstr-Quad-Extruder-3D-Printer.jpg?resize=470%2C260A Heated Print Bed has been added to the 3DMonstr allowing the use of high-heat Filaments, such as ABS Filament. The Kickstarter Campaign has already surpassed it’s goal and currently as about $59,000 in funding. The Makers have set a stretch goal of $65,000 in funding in which all backers of the 3DMonstr will receive a choice of 1 pound of Taulman 645, Taulman Nylon 618, or T-Glase Filament that will be sent for free with their 3DMonstr 3D Printer. Learn more about the 3DMonstr by clicking here. You can find out more about the 3 specialty Filaments above by Taulman by clicking here.

Happy Printing!

Image

Rapide One Introduces A 3 Easy Payments Plan For The Rapide One 3D Printer!

http://allabout3dprinting.com/rapid-one-3d-printer-professional-3d-printing-everyone/

Professional 3D Printing for everyone

Rapide One has made it possible for you to pay only a third of the total funding for the level you choose on the campaign page and then the other two payments over the course of  about 2 months. Rapide One also offers huge discount offers. Buy a $150 discount card and Rapide One will take $500 of the price of your 3D Printer. Buy the discount card costing $300 and Rapide will take $750 off of the price of your 3D Printer! Find out more about the Rapide One!

Happy Saving!

Image

The Rapide One #3DPrinter Reaches Half Of Its Campaign Funding

http://allabout3dprinting.com/rapid-one-3d-printer-professional-3d-printing-everyone/

Professional 3D Printing for everyone

The Rapide One allows professional quality 3D Prints at an affordable price. The IndieGoGo campaign is over halfway funded with 3 weeks to go. Check the Rapide One out here.

Image

The Mini Metal Maker Metal Printing 3D Printer Gets A Make Over

This Affordable Open Source Metal Printing 3D Printer Gets A New Look

From The Maker: Here is a first-release look at the production version Mini Metal Maker. The new machine is slightly shorter and narrower than the prototype. It has a reduced parts-count, higher rigidity and, yes, is made primarily of powder coated metal. Any color suggestions? 🙂

mini_metal_maker_new_look|http://images.indiegogo.com/file_attachments/279588/files/20131226135428-Screen_Shot_2013-12-26_at_2.49.07_PM.png?1388094868

New Look!

Join the discussion!

Image

Makerbot Specialized PLA Filament Sale

 

Makerbot_special_pla_filament_sale|http://store.makerbot.com/pla-filamentMakerbot is running a 10% off sale on all of their True/Rich Color, Translucent, and Limited Edition Glow-in-the-Dark and Sparkly PLA Filaments when you order three spools or more. Visit their store here  and Happy Printing!

Image

The #Robox Team Invites You To Their Development Forum

robox_development_forum|https://ci4.googleusercontent.com/proxy/9Jhd3JmXKsItaomeJ8CmFPelhoVwitJjol6F8ppmsm6zMDB0hFsU_8E9oNyx23VFsm1MCiDSaZt05pArwSA8iUasv44u1wzK_2LZZqeDSzhb2hRW3IzdcpGq3qIVHAW094XH=s0-d-e1-ft#https://gallery.mailchimp.com/430d04fb7982e2159e04ad59c/images/Assembly_3.jpg

Factory Primed For The Beta Units

Join the Forum or find out more on the Robox Kickstarter Page!

Happy Printing!

What Does Volume Mean For #3DPrinters and #3DScanners

What Is Volume In The World Of

3D Printing?

Refers to the capacity of a 3D Printer, 3D Scanner, or other device. For example; the maximum height of the range of vertical motion for the Extruder Head combined with the maximum dimensions of the Print Bed dictate the maximum size of an object it can Print. For a 3D Scanner, the Scan Volume is simply the maximum dimensions of an object it can Scan, this is usually dictated by the dimensions of the Bed/turn-table and the range of motion of the camera(s) and Laser(s), if equipped. Some devices do not have a set maximum Volume.

Fuel_3D_3D_Scanner|http://allabout3dprinting.com/the-fuel-3d-handheld-3d-scanner/Point-and-Shoot 3D Scanners are only limited by how much its software can accommodate as they are basically digital cameras that are optimized to recreate the object 3-Dimensionally for manipulation and/or 3D Printing. An example of a Point-and-Shoot 3D Scanner is the Fuel 3D Scanner. Some 3D Printers, such as Stereolithographic 3D Printers, are only limited by the amount of Filament you have as well as the size of the container you available to Print the object in. An example of a 3D Printer with this capability is the Peachy.