Category Archives: Campaign Update

Image

All MakerKase #3DPrinter Cabinet Units Will Now Come With A Temperature Controller

maker_kase_powder_coated_steel|http://allabout3dprinting.com/maker-kase-universal-3d-printer-cabinet/

Protecting Your Investment

Every MakerKase you back on Kickstarter will come with its own STC-1000 Electronic Temperature Controller. If you aren’t familiar with the MakerKase it is a universal 3D Printer cabinet which helps protect your investment as well as your 3D Printing projects by helping maintain proper temperature as well as protecting curious hands from burns. Learn more about the MakerKase here!

Image

The Mini Metal Maker Gets Improved Motors

mini_metal_maker_new_motors|http://images.indiegogo.com/file_attachments/327502/files/20140124100322-newMotors.jpg?1390586602“New motors received for the prototype2.0 that is currently under construction.  Along with making the motor carriage design more modular and rigid, the new design incorporates some new parts in the extruder intended to reduce the line diameter to below 100um.”

|Source: Mini Metal Maker IndieGoGo Campaign Updates Page

Campaign Home Page

Link

The Rapide One #3DPrinter by @rapide3d Has Reached and Surpassed Its Funding Goal!

The Rapide One 3D Printer Has Surpassed Its IndieGoGo Crowdfunding Goal With More Than A Week Left For Additional Funding

Find Out More About The Rapide One Here and stay tuned to the blog for additional Stretch Goals the Maker (manufacturer) may add.

Image

3DMonstr Quad Extruder #3DPrinter Gets A Heated Print Bed and New Stretch Goal

http://i0.wp.com/allabout3dprinting.com/wp-content/uploads/2014/01/The-3DMonstr-Quad-Extruder-3D-Printer.jpg?resize=470%2C260A Heated Print Bed has been added to the 3DMonstr allowing the use of high-heat Filaments, such as ABS Filament. The Kickstarter Campaign has already surpassed it’s goal and currently as about $59,000 in funding. The Makers have set a stretch goal of $65,000 in funding in which all backers of the 3DMonstr will receive a choice of 1 pound of Taulman 645, Taulman Nylon 618, or T-Glase Filament that will be sent for free with their 3DMonstr 3D Printer. Learn more about the 3DMonstr by clicking here. You can find out more about the 3 specialty Filaments above by Taulman by clicking here.

Happy Printing!

Image

Rapide One Introduces A 3 Easy Payments Plan For The Rapide One 3D Printer!

http://allabout3dprinting.com/rapid-one-3d-printer-professional-3d-printing-everyone/

Professional 3D Printing for everyone

Rapide One has made it possible for you to pay only a third of the total funding for the level you choose on the campaign page and then the other two payments over the course of  about 2 months. Rapide One also offers huge discount offers. Buy a $150 discount card and Rapide One will take $500 of the price of your 3D Printer. Buy the discount card costing $300 and Rapide will take $750 off of the price of your 3D Printer! Find out more about the Rapide One!

Happy Saving!

Image

The Rapide One #3DPrinter Reaches Half Of Its Campaign Funding

http://allabout3dprinting.com/rapid-one-3d-printer-professional-3d-printing-everyone/

Professional 3D Printing for everyone

The Rapide One allows professional quality 3D Prints at an affordable price. The IndieGoGo campaign is over halfway funded with 3 weeks to go. Check the Rapide One out here.

Image

The Mini Metal Maker Metal Printing 3D Printer Gets A Make Over

This Affordable Open Source Metal Printing 3D Printer Gets A New Look

From The Maker: Here is a first-release look at the production version Mini Metal Maker. The new machine is slightly shorter and narrower than the prototype. It has a reduced parts-count, higher rigidity and, yes, is made primarily of powder coated metal. Any color suggestions? 🙂

mini_metal_maker_new_look|http://images.indiegogo.com/file_attachments/279588/files/20131226135428-Screen_Shot_2013-12-26_at_2.49.07_PM.png?1388094868

New Look!

Join the discussion!